Solid and chunky hardwood pegs, more suited for larger tents and marquees.
Made from a variety of hardwoods including Beech, Ash, Oak, and Maple.
These longer wooden tent/camping pegs are approx 38cm (or 15 inch in old money) long, and approx 18mm (3/4 inch) thick. They are 5cm wide (2inch) at the widest point
Available in a variety of quantities from the drop down box.
Please use with a wooden, plastic or rubber mallet, a metal hammer will damage the little fellas.
All measurements are approximate, you could get slight variations in the same pack.
What Are Wooden Tent Pegs?
Wooden tent pegs are solid, handcrafted stakes made from quality hardwood. Their traditional design offers a natural look and excellent durability. Engineered to be driven into various types of ground, these pegs provide stability to tents and outdoor structures, ensuring a firm hold in both soft soil and rocky terrains.
Why Choose Wooden Tent Pegs?
Opt for wooden tent pegs when you need a sustainable, reliable solution for anchoring your outdoor setup. Hardwood tent pegs offer a natural, rustic charm and can flex with uneven terrain, reducing the risk of breakage compared to rigid plastic or metal alternatives. Unlike materials that rely on petrochemicals and often end up in landfill, hardwood is biodegradable and ours is sourced responsibly, making it a far more eco-friendly choice for long-term use.
Uses of Our Wooden Tent Pegs
- Camping and caravanning
- Scout and guide camping events
- Anchoring marquees at outdoor events
- Securing netting, tarpaulins, or temporary shelters
- DIY projects and garden setups
Bulk Purchase Options
For businesses, scout groups, or camping clubs, we offer bulk purchase options for our wooden tent pegs. Ordering large quantities not only ensures you’re well-stocked for your next outing or event, but it also comes with cost-saving benefits and flexible delivery options tailored to your needs.
Environmental & Sustainability of Our Hardwood Tent Pegs
Not only are our hardwood pegs designed to last a long time battling the cheap single use consumer market but all our wood is sustainably sourced, so you can be confident you are doing your bit for the environment. We also donate to both the Woodland Trust and One Tree Planted every month regardless of our sales to help play a part in the worlds reforestation efforts.
Bury to the right depth - Sink at least two‑thirds of the peg’s length into the ground. In softer soil, tap just below the hook first, then finish driving until the hook sits just above the surface.
Orient the tent peg - Set the hook so that the open part faces directly away from the tent. This way, the guy-line sits securely in the hook and pulls in the correct direction, improving tension and reducing the risk of movement or slippage.
Pre‑drill or loosen very hard ground - In compacted or rocky soil, create a small pilot hole using a metal spike or rod before driving in the hardwood. This prevents splitting and lets you reach full depth.
Add extra grip in loose ground - For sandy or very soft soils, bury a flat stone or clump of turf over the buried portion of the peg. Alternatively, wrap a short length of cord around the peg below ground level to act like an auger.
Maintain steady tension - Aim for firm but not overly tight guy‑lines—too much tension can lever the peg out over time. Use a line tensioner or cam buckle to keep tension consistent as the ground and fabric settle.
Check and adjust periodically - Every few hours or each morning, give each stake a gentle tap back to depth if it’s crept up. A quick check can save you from waking to a loose tent.
Pour water into the pilot hole - A little water softens compacted soil, making it easier to drive the peg home without excessive force.
Wrap for extra grip - Wind a length of strong cord or thin rope around the buried portion of the peg to add texture and help it bite into the ground like an auger.
Consider longer pegs - Switch to slightly longer hardwood pegs to reach softer soil layers below the surface.
Use a wooden, plastic, or rubber mallet - These tools deliver the right amount of force without splitting or denting the pegs.
Avoid metal hammers - Metal hammer strikes can crack or damage the pegs, compromising their strength and lifespan.